Thermo-Tec Products

 

 

Exhaust Insulating Wrap
 

The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.

Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos.

Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.

 

Exhaust Insulating Wrap (Graphite Black)
 

The original Exhaust Insulating Wrap was developed over 12 years ago by Thermo-Tec. Exhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.

Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos.

Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.

 

 

Generation II Copper Header Wrap
 

Generation II Copper Header Wrap improves heat resistance up to 30% more than current technology, by utilizing a new proprietary coating developed by Thermo-Tec; improved Thermal-Conduction-Technology (T-C-T).

Generation II Copper Exhaust Wrap creates more horsepower and reduces under-hood temperatures, increases exhaust scavenging, withstands continuous heat up to 2000F, contains no asbestos.

Generation II Copper Exhaust Wrap is sold in one or two inch wide, 50 foot rolls with a low profile 1/16" thickness.

 

Snap Strap
 
The multi-purpose stainless steel Snap Straps are used to secure the Exhaust Insulating Wrap - and more.

The high-temperature stainless steel straps have a narrow profile to fit tight spots, and can be cut to the exact length needed.

Snap Straps secure with easy-to-use slide-through fasteners.

New precut lengths with tough multi-lock system.


 

 

Heat Sleeves
 
This new silicone-coated fiberglass fire sleeving is designed to protect wires, cables and hoses from high-temperature exposure, liquid spills and occasional exposure to flame.

The high-quality sleeving is made in the U.S.A. from braided fiberglass and coated with a compound silicone rubber. It is capable of continuous protection to 500F and short-term exposure thru 2200F.

Available in two colors, silver and black; three diameters, 1/2 in., 3/4 in. and 1 in; and three lengths, 3 ft., 10 ft. and 50 ft.

 

Cool-It Plug Wire Sleeves
 
This unique spark plug and ignition wire protector comes in five sporty colors; red, orange, blue, black and natural. These dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life and will not react with petroleum products.

The double-wall construction keeps the wire and boot cooler in a high-temperature engine. Its universal size fits most boots, is easy to install and - most important - is non-flammable.  Cool-It Plug Wire Sleeves can be used in any high-temperature environment from street vehicles to motor homes. Sleeves are available in packs of 4 & 6

 

Hi-Heat Coating
 
To finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating.

The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seal the pores to minimize the penetration of harmful liquids.

The coating also works excellent as a paint direct on metal surfaces.

 

Starter Heat Shield
 
In today's high-heat environment, starters take in a lot of damaging heat that destroys the windings of the starter and solenoid. To combat this problem, Thermo-Tec created a non-conductive strap-on heat shield with a highly-reflective mylar surface.

The Starter Heat Shield will reflect over 90% of radiant heat, adding life to the starter and assuring reliable starts.

The Starter Heat Shield is a universal kit that fits all starters.